Here are two options for calculating your cavity slider trim size... 1) use the formula here, or 2) use the calculator below.
WHY CHOOSE HALLMARK CAVITY SLIDERS
Hallmark Group have been NZ’s door experts for more than 30 years
All Hallmark Cavity Sliders are backed by our 10 Year Warranty
Our premium components are built strong, to withstand years of rigorous use
Our premium running gear rolls super-smooth and quietly for years
With full control over our production we guarantee the highest quality standards
All timber components of our slider pockets are renewable NZ Pine
PRODUCT OPTIONS
CONFIGURATION OPTIONS
Below are the more common configurations, however we can custom-make to most design requirements. While the drawings show standard height cavity sliders, all configurations are also available in full-height, and in either 90mm, 140mm stud, or to your custom requirements.
Single
Double Stacking
No Closing Jamb
Flush Ceiling Height
Bi-Part Double Stacking
Bi-Parting
Right Angle (Corner Meeting)
JAMB OPTIONS
TIMBER GROOVED JAMB
Grooved jambs have rebates for wallboard linings to slot into. Single or double grooved options are available, and we can machine the jambs to any specialist lining requirements.
TIMBER ARCHITRAVE
Architrave jambs are flat jambs that allow for architraves to be attached over the top.
ALUMINIUM ARCHITRAVE
Hallmark have a premium aluminium jamb system. This strong two-piece aluminium jamb suits a range of wall thicknesses, resulting in robust longevity and minimalist appearance.
CAVZERO PLASTERBOARD RETURN
The CavZero plasterboard return concealed jamb system enables clean lines for a sleek modern finish.
WALL-MOUNTED SURFACE SLIDING DOORS
Hallmark also produce a wall-mounted surface sliding door system. Installation is simple and our head track comes with matching end caps to conceal the track, resulting in a versatile and tidy surface slider.
FINISHING OPTIONS
STANDARD HEIGHT FINISH
The Standard Height cavity slider is used in a typical doorway where the wall wraps around the top of door. A full range of jamb options are available (see previous page), and either Classic or CavZero systems can be used.
FLUSH CEILING FINISH
For beautiful uninterrupted clean lines, the Flush Ceiling finish has the slider running the full height from floor to ceiling. Our CavZero system is used for an elegant look with minimal gap between door and ceiling, and to allow easy removal of door if required.
OPENING & CLOSING OPTIONS
Hallmark’s CavZero system offers the advantage of being able to fit or adjust any of these systems without having to remove architraves, which also means no painting required! Hallmark’s Soft Close & Soft Open units are available on any configuration.
SOFT CLOSE
SOFT OPEN
The Soft Close automatically brings your door to a smooth and quiet stop when closing.
The Soft Open prevents the door from slamming against the back of the pocket when opening.
PROTRUDING
A protruding opening is where the opened door protrudes, usually by 100mm, to allow for a handle to be used to close the door. A Soft Close and Soft Open can be applied to a protruding opening.
JEXIS OPENER
A Jexis Opener allows the door to spring from the pocket from the flush position. A gentle push on the end of the door activates the spring-loaded opener and the door pops out of the pocket ready to be closed.
DOOR LEAF OPTIONS
PAINT QUALITY, GLAZED AND GROOVED DOORS
Hallmark is a leading New Zealand door manufacturer with the largest premium door offering in NZ. These include standard doors, doors with vision panels, grooved doors, and a range of beautiful wood veneer doors - we have 100s of door leaf options, all of which can be used with our cavity slider systems.
All doors are available in a range of sizes, and as either Honeycomb-core, Solid-core or Polystyrene-core, providing a range of acoustic barrier properties.
Hallmark’s high-tech precision manufacturing process and 4.75mm premium door skins stand the brand apart from lower quality alternatives.
All cavity slider Paint Quality doors up to 1600mm wide are 37-38mm thick, however doors 1601mm or wider will be 42mm thick (and require a 140mm stud pocket).
Hallmark doors come pre-routed for our cavity slider systems so there’s no messing about on-site, and custom routing for hardware is also offered.
VENEER DOORS
Hallmark has its own veneer slicing and processing facility. We offer a complete veneer solution, producing both veneer panels and veneer doors, ensuring an accurate match between your panels and doors.
We offer an extensive selection of sustainably-sourced timbers including a NZ Native Range, Exotic Species Range, and Recon Range.
ALUMINIUM FRAMED GLAZED SLIDERS
Also available are aluminium-framed glazed sliders. This is a classy aluminium-framed unit with no visible screws or fixings. It can be supplied in natural anodised finish, or powder-coated to almost any colour to suit your design.
SPECIALTY SIZE & STRENGTH OPTIONS
Our framing system caters for extra-wide or extra-high units, with the ability to insert steel reinforcement when additional strength is needed. We offer premium aluminium extrusions with one-cell, two-cell, or three cell sections and a range of reinforcement options depending on strength integrity requirements.
EXTRA-STRENGTH POCKET OPENING JAMBS
Triple cell pocket opening
Triple cell pocket opening with steel insert
EXTRA-STRENGTH MID STUD SECTIONS
Double cell mid stud
Double cell mid stud with steel insert
Oversized strengthened cavity sliders
SOLID PLYWOOD CAVITY POCKETS
Plywood cavity panels are available to create solid cavity walls to allow for fixings. Available in single-side or double-side.
TRACK AND CARRIAGE SYSTEMS
Hallmark offers two world-class track systems: CavZero, with its ability to remove the door without removing trims or architraves, and the Classic, the tried & tested classic track & carriage.
CAVZERO
